Monday, July 13, 2009

Invitation Wording At Tamil Format

GIS Exercise 5: Area accounting

In the 5th GIS exercise we should create an area of accounting departments at the TU KL.
was first the shape file TU_KL.shp "with the help of the vector layers added.

will summarize the subject areas you go to "Dissolve tool" and stores the resulting shapefile.

The last leads to the area by accounting (Tools, Tool Geometry, Export / Add geometry Columns) + = Dissolvedatei save as "tu_kl_bilanzierung.


Green Tree Pythons In Canada

GIS Exercise 4: Spatial processing

The task of the 4th Exercise this time was the Habitats and VSG areas in Rhineland-Palatinate present. The first step was the first time to open a new project titled "Natura 2000", then the GK
Zone 2 and as a unit "meters" to adjust.
were then inserted, TK 100, LK_RLP and the Habitats and VSG sites. Then we should
(right click to save it LK_RLP Shape File), the district of Birkenfeld and Bernkastel-Wittlich opened using the attribute table (right click on LK_RLP) and then save it as a shapefile. After saving the shapefile is added as a layer.
Next, the VSG and FFH lifted areas using the plugin "FTool.
First you go to Tools, then Research Tools and then "Select by location. After the appearance of the window at the top of VSG (FFH) and downward LK_RLP entered and then save the target to the specified.
For the VSG and FFH areas are limited precisely, you go to Tools, then geoprocessing tools, and then clip, then the top will VSG_RLP (FFH_RLP) and bottom LK_BIR_WIL specified and in the end the desired location and name selected. This creates two shapefiles that will be integrated as a layer. To summarize
FFH areas and laminated they are selected by using the tools, geoprocessing tools, Union (at the top and bottom VSG_clip FFH_clip) and stored.
Finally set the transparency of TC 100 to 75% and classified each Areas.



Sunday, June 21, 2009

Incontinence Swim Wear

GIS Exercise 3


In our 3rd Exercise, we should digitize the building of the Technical University of Kaiserslautern in color and by department.
The "TK25" was inserted by atomic layer, but with the help of a vector layer shape file "TU Kaiserslautern" needed to digitize and color the building to.
After the given building were digitized with the help of the polygons, one complemented the attributes table to the building numbers.

Monday, May 25, 2009

Fixed Deposit Rate In Dubia

U2: Quantum GIS

The 2nd Exercise of the 2nd Semester deals with Quantum GIS. Since it is a broader agenda that takes a lot of exercise, and 10 times of patience.
To get an accurate picture of Quantum GIS, I will describe my work step by step:

is inserted at the beginning of the topographic map 100 with the help of the grid layer.


Next come the maps of the local community, municipality and county. Since there are no image files, they are inserted with the help of the vector layer. To uniquely identify each card in each of different colors and intensities are taken.

The next step is the map of protected areas added with a line width of 3 and a green border.

And finally, that labels the maps of the local community, and nature reserves ...


... and the place Weilerbach be shown using the attribute table.


Monday, May 11, 2009

Why Do My Iceskates Hurt My Feet

U1: GIS and coordinate systems using the example of the GK system

1) What is an ellipsoid?
An ellipsoid is a higher-dimensional variant of an ellipse, the surface can be described mathematically.
http://www.infobitte.de/free/lex/wpdeLex0/online/e/el/Ellipsoid.htm

2) What is the name of the ellipsoid used in the GK system?
The name of the ellipsoid, which is used in the GK system is the Bessel ellipsoid or Krassowski
http://de.wikipedia.org/wiki/Gau% C3% 9F-Kr% C3% BCger coordinate system
3) What is the difference between geographic and projected Cartesian coordinates?
man can with geographic coordinates describe the position of a point on the earth. The earth is divided in 360 degrees of longitude and 180 degrees of latitude. http://de.wikipedia.org/wiki/Geographische_Koordinate
A Cartesian coordinate system is an orthogonal coordinate system. It was after the French inventor René Descartes named. In two-and three-dimensional space is the most widely used coordinate system, because for many of the best and simplest representations system.
http://de.wikipedia.org/wiki/Kartesisches_Koordinatensystem
4) What is the Gauss-Krüger projection system based on?
The Gauss-Krüger system belongs to the genus of the transverse Mercator projection. http://www.basilautzkis.de/downloads/gausskruegersystem.pdf
5) What advantages does a Cartesian coordinate system?
In two-and three-dimensional space is the most widely used system of coordinates, since for so many representations of the best and easiest System.
http://de.wikipedia.org/wiki/Kartesisches_Koordinatensystem

6) To which unit is at GK-coordinates?
The unit is in meters.
laws and high value have both 7 and 2 to 3 digits before the decimal point.
The high value is the distance from the equator, so in Germany about 5800 KM.
The first digit of the right value is the ratio of the strip.
The center of the strip (the central meridian) equals a constant of meters +500000
The second digit of the right value is, therefore, often a 4 (west to 100 km) or 5 (east to 100 Km)
http://wiki.openstreetmap. org / index.php / Gauss-Krüger
7) What is meant in this context, the term "Meridian?
The meridian is called the longitude on the Earth's surface, runs from one pole of the geographical to the other. He also is the line of all geographic locations where the sun is at the same time the highest point of their career days (day sheet). The word origins from the Latin circulus Meridianus equal to "lunch group" is also indicative of this relationship.
http://de.wikipedia.org/wiki/Meridian_ (Geography)
8) Why are used in GK system called meridian strip?
The figure of the ellipsoid in the plane is not possible without distortion, because it can not be shown without projection. All projections distort the outline of large areas in at least one of the five geographical relations: area, angle, shape, distance, direction.
To keep these distortions as low as possible, the picture area into so-called meridian strip is divided.
http://www.geocontent.de/index.php?id=17&F = # C148
9) How to recognize the code used in the GK-stripes on a coordinate?
The grid of geographical coordinates is divided into 3 ° wide meridian strips (a classification is also used in 6 °) on. Each meridian strip is from the North to the South Pole to his so-called parallel Central meridian drawn. The central meridians Meridian adjacent strips are therefore 3 ° (or 6 °) apart.
ratio = {0 °, 3 °, 6 °, ... , 351 °, 354 °, 357 °} / 3
http://de.wikipedia.org/wiki/Gauß-Krüger-Koordinatensystem

10) Which formula can be the easiest of the central meridian of any GK-strip charge?
The Central Meridian is clear (east of Greenwich) from the formula
ZM = ((zone number - 30) * 6 °) - 3 ° east
For the Western Hemisphere:
ZM = ((30 - Zone number) * 6 ° ) + 3 ° west http://www.olanis.de/knowhow/mapprj/mapprj8.shtml

11 ratios) you dic terms "Easting" and "Northing" in the current context.
Easting - Northing Easting
-because the values increase to the east-
Northing values are greater to the north
http://www.olanis.de/knowhow/mapprj/mapprj5.shtml
http://www.geoinformatik.uni -rostock.de/einzel.asp? id = 57

12) What is meant by the terms "False Easting and False Northing"?
"False Easting" Avoid negative coordinate - the Meridian calculated by adding the push of 500.000 to the west.
"False Northing" - this method to the equator applied.
http://www.olanis.de/knowhow/mapprj/mapprj5.shtml
13) False Easting and False Northing "used in the GK system?
"False Easting" - since one of the GK system assumes funds meridians and negative values can occur.
"False Northing" - if one wants to determine coordinates in the southern hemisphere.

14) Explain briefly the letters 'OGC' "SRS" "EPSG code sets
Open Geospatial Consortium organization that communal use standards relating to the development of spatial information processing.
Spatial Reference System-synonymous CRS (coordinate reference system), which is a coordinate system by linking with a date on the real world is related.
EPSG code globally unique 4 - to 5-digit codes for coordinate systems that were introduced by the European Petroleum Group Geodey Surgey. http://de.wikipedia.org/wiki/Open_Geospatial_Consortium

15) Which "EPSG codes" are used in Germany?
31 466 to 31 467 for
DHDN Zone 2 Zone 3 DHDN
31 468 31 469
for DHDN Zone 4 Zone 5 for DHDN
http://de.wikipedia.org/wiki/European_Petroleum_Survey_Group_Geodesy

Wednesday, March 11, 2009

100% Free Gay Streaming

resubmission: Übung6 creating a 3D city model

resubmission Exercise 6: "Development of a 3D city model" - Age gymnasium
The proportions of some buildings have been changed. In this case, the amount processed and aligned the walls. Thus, the window sizes have been corrected. The people in the square are no longer larger than the window itself Previously, this was the case prior to the Signal-Iduna-building, in the white house next to it and the Insurance Board-Bayern-building.
The furniture of the place has been fixed. Thus, no heaters are more on the court, but real street lamps.
were also missing roof mounted geometries (dormers) at the Gerry-Weber-building.

Tuesday, February 10, 2009

Fastum For Ankle Pain

Exercise 6: Creating a 3D city model

The rectified images from Exercise 5 were shown in Exercise 6 facades of the houses on the old tower space by using Sketch Up to a 3-D model. You have to get a plan Grueine basis of the square in Exercise 5, whereupon the houses 3-dimensionally, by means of vectors, raised to be had. After construction of the houses had the walls (that is, the rectified images from Exercise 5) are attached, roofs and dormer windows are constructed and ultimately plantings and objects such as cars, lamp posts and benches are integrated into the overall model. In addition, roads and footpaths have been created. For me
personal understanding of the program is easy to like SketchUp, as it is very clearly structured. However, must be paid to every detail in creating such a model, which is very time consuming.

Cost Of Topsy Turvy Wedding Cake

Exercise 5 facade equalization


The Exercise 5 included the correction of photos of the "old sports field" in Neustadt an der Weinstrasse. There have been photos of the facades of the houses in this square, representing the perspective of a pedestrian. Then these images were processed with Photoshop and equalized, which were then mockup on a plan with the before and after pictures and the basic plan of the place.

Whats A Good Travel Backpack

Exercise 4: Planning with AutoCAD